Struct std::num::Wrapping

pub struct Wrapping<T>(pub T);

Provides intentionally-wrapped arithmetic on T.

Operations like + on u32 values is intended to never overflow, and in some debug configurations overflow is detected and results in a panic. While most arithmetic falls into this category, some code explicitly expects and relies upon modular arithmetic (e.g., hashing).

Wrapping arithmetic can be achieved either through methods like wrapping_add, or through the Wrapping<T> type, which says that all standard arithmetic operations on the underlying value are intended to have wrapping semantics.

Examples

fn main() { use std::num::Wrapping; let zero = Wrapping(0u32); let one = Wrapping(1u32); assert_eq!(std::u32::MAX, (zero - one).0); }

use std::num::Wrapping;

let zero = Wrapping(0u32);
let one = Wrapping(1u32);

assert_eq!(std::u32::MAX, (zero - one).0);

Trait Implementations

impl<T> Debug for Wrapping<T> where T: Debug

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Display for Wrapping<T> where T: Display

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Shl<usize> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the << operator

fn shl(self, other: usize) -> Wrapping<u8>

The method for the << operator

impl ShlAssign<usize> for Wrapping<u8>

fn shl_assign(&mut self, other: usize)

The method for the <<= operator

impl Shr<usize> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the >> operator

fn shr(self, other: usize) -> Wrapping<u8>

The method for the >> operator

impl ShrAssign<usize> for Wrapping<u8>

fn shr_assign(&mut self, other: usize)

The method for the >>= operator

impl Shl<usize> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the << operator

fn shl(self, other: usize) -> Wrapping<u16>

The method for the << operator

impl ShlAssign<usize> for Wrapping<u16>

fn shl_assign(&mut self, other: usize)

The method for the <<= operator

impl Shr<usize> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the >> operator

fn shr(self, other: usize) -> Wrapping<u16>

The method for the >> operator

impl ShrAssign<usize> for Wrapping<u16>

fn shr_assign(&mut self, other: usize)

The method for the >>= operator

impl Shl<usize> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the << operator

fn shl(self, other: usize) -> Wrapping<u32>

The method for the << operator

impl ShlAssign<usize> for Wrapping<u32>

fn shl_assign(&mut self, other: usize)

The method for the <<= operator

impl Shr<usize> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the >> operator

fn shr(self, other: usize) -> Wrapping<u32>

The method for the >> operator

impl ShrAssign<usize> for Wrapping<u32>

fn shr_assign(&mut self, other: usize)

The method for the >>= operator

impl Shl<usize> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the << operator

fn shl(self, other: usize) -> Wrapping<u64>

The method for the << operator

impl ShlAssign<usize> for Wrapping<u64>

fn shl_assign(&mut self, other: usize)

The method for the <<= operator

impl Shr<usize> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the >> operator

fn shr(self, other: usize) -> Wrapping<u64>

The method for the >> operator

impl ShrAssign<usize> for Wrapping<u64>

fn shr_assign(&mut self, other: usize)

The method for the >>= operator

impl Shl<usize> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the << operator

fn shl(self, other: usize) -> Wrapping<usize>

The method for the << operator

impl ShlAssign<usize> for Wrapping<usize>

fn shl_assign(&mut self, other: usize)

The method for the <<= operator

impl Shr<usize> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the >> operator

fn shr(self, other: usize) -> Wrapping<usize>

The method for the >> operator

impl ShrAssign<usize> for Wrapping<usize>

fn shr_assign(&mut self, other: usize)

The method for the >>= operator

impl Shl<usize> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the << operator

fn shl(self, other: usize) -> Wrapping<i8>

The method for the << operator

impl ShlAssign<usize> for Wrapping<i8>

fn shl_assign(&mut self, other: usize)

The method for the <<= operator

impl Shr<usize> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the >> operator

fn shr(self, other: usize) -> Wrapping<i8>

The method for the >> operator

impl ShrAssign<usize> for Wrapping<i8>

fn shr_assign(&mut self, other: usize)

The method for the >>= operator

impl Shl<usize> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the << operator

fn shl(self, other: usize) -> Wrapping<i16>

The method for the << operator

impl ShlAssign<usize> for Wrapping<i16>

fn shl_assign(&mut self, other: usize)

The method for the <<= operator

impl Shr<usize> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the >> operator

fn shr(self, other: usize) -> Wrapping<i16>

The method for the >> operator

impl ShrAssign<usize> for Wrapping<i16>

fn shr_assign(&mut self, other: usize)

The method for the >>= operator

impl Shl<usize> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the << operator

fn shl(self, other: usize) -> Wrapping<i32>

The method for the << operator

impl ShlAssign<usize> for Wrapping<i32>

fn shl_assign(&mut self, other: usize)

The method for the <<= operator

impl Shr<usize> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the >> operator

fn shr(self, other: usize) -> Wrapping<i32>

The method for the >> operator

impl ShrAssign<usize> for Wrapping<i32>

fn shr_assign(&mut self, other: usize)

The method for the >>= operator

impl Shl<usize> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the << operator

fn shl(self, other: usize) -> Wrapping<i64>

The method for the << operator

impl ShlAssign<usize> for Wrapping<i64>

fn shl_assign(&mut self, other: usize)

The method for the <<= operator

impl Shr<usize> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the >> operator

fn shr(self, other: usize) -> Wrapping<i64>

The method for the >> operator

impl ShrAssign<usize> for Wrapping<i64>

fn shr_assign(&mut self, other: usize)

The method for the >>= operator

impl Shl<usize> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the << operator

fn shl(self, other: usize) -> Wrapping<isize>

The method for the << operator

impl ShlAssign<usize> for Wrapping<isize>

fn shl_assign(&mut self, other: usize)

The method for the <<= operator

impl Shr<usize> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the >> operator

fn shr(self, other: usize) -> Wrapping<isize>

The method for the >> operator

impl ShrAssign<usize> for Wrapping<isize>

fn shr_assign(&mut self, other: usize)

The method for the >>= operator

impl Add<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the + operator

fn add(self, other: Wrapping<usize>) -> Wrapping<usize>

The method for the + operator

impl AddAssign<Wrapping<usize>> for Wrapping<usize>

fn add_assign(&mut self, other: Wrapping<usize>)

The method for the += operator

impl Sub<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the - operator

fn sub(self, other: Wrapping<usize>) -> Wrapping<usize>

The method for the - operator

impl SubAssign<Wrapping<usize>> for Wrapping<usize>

fn sub_assign(&mut self, other: Wrapping<usize>)

The method for the -= operator

impl Mul<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the * operator

fn mul(self, other: Wrapping<usize>) -> Wrapping<usize>

The method for the * operator

impl MulAssign<Wrapping<usize>> for Wrapping<usize>

fn mul_assign(&mut self, other: Wrapping<usize>)

The method for the *= operator

impl Div<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the / operator

fn div(self, other: Wrapping<usize>) -> Wrapping<usize>

The method for the / operator

impl DivAssign<Wrapping<usize>> for Wrapping<usize>

fn div_assign(&mut self, other: Wrapping<usize>)

The method for the /= operator

impl Rem<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the % operator

fn rem(self, other: Wrapping<usize>) -> Wrapping<usize>

The method for the % operator

impl RemAssign<Wrapping<usize>> for Wrapping<usize>

fn rem_assign(&mut self, other: Wrapping<usize>)

The method for the %= operator

impl Not for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the ! operator

fn not(self) -> Wrapping<usize>

The method for the unary ! operator

impl BitXor<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the ^ operator

fn bitxor(self, other: Wrapping<usize>) -> Wrapping<usize>

The method for the ^ operator

impl BitXorAssign<Wrapping<usize>> for Wrapping<usize>

fn bitxor_assign(&mut self, other: Wrapping<usize>)

The method for the ^= operator

impl BitOr<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the | operator

fn bitor(self, other: Wrapping<usize>) -> Wrapping<usize>

The method for the | operator

impl BitOrAssign<Wrapping<usize>> for Wrapping<usize>

fn bitor_assign(&mut self, other: Wrapping<usize>)

The method for the |= operator

impl BitAnd<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the & operator

fn bitand(self, other: Wrapping<usize>) -> Wrapping<usize>

The method for the & operator

impl BitAndAssign<Wrapping<usize>> for Wrapping<usize>

fn bitand_assign(&mut self, other: Wrapping<usize>)

The method for the & operator

impl Neg for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the - operator

fn neg(self) -> Wrapping<usize>

The method for the unary - operator

impl Add<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the + operator

fn add(self, other: Wrapping<u8>) -> Wrapping<u8>

The method for the + operator

impl AddAssign<Wrapping<u8>> for Wrapping<u8>

fn add_assign(&mut self, other: Wrapping<u8>)

The method for the += operator

impl Sub<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the - operator

fn sub(self, other: Wrapping<u8>) -> Wrapping<u8>

The method for the - operator

impl SubAssign<Wrapping<u8>> for Wrapping<u8>

fn sub_assign(&mut self, other: Wrapping<u8>)

The method for the -= operator

impl Mul<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the * operator

fn mul(self, other: Wrapping<u8>) -> Wrapping<u8>

The method for the * operator

impl MulAssign<Wrapping<u8>> for Wrapping<u8>

fn mul_assign(&mut self, other: Wrapping<u8>)

The method for the *= operator

impl Div<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the / operator

fn div(self, other: Wrapping<u8>) -> Wrapping<u8>

The method for the / operator

impl DivAssign<Wrapping<u8>> for Wrapping<u8>

fn div_assign(&mut self, other: Wrapping<u8>)

The method for the /= operator

impl Rem<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the % operator

fn rem(self, other: Wrapping<u8>) -> Wrapping<u8>

The method for the % operator

impl RemAssign<Wrapping<u8>> for Wrapping<u8>

fn rem_assign(&mut self, other: Wrapping<u8>)

The method for the %= operator

impl Not for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the ! operator

fn not(self) -> Wrapping<u8>

The method for the unary ! operator

impl BitXor<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the ^ operator

fn bitxor(self, other: Wrapping<u8>) -> Wrapping<u8>

The method for the ^ operator

impl BitXorAssign<Wrapping<u8>> for Wrapping<u8>

fn bitxor_assign(&mut self, other: Wrapping<u8>)

The method for the ^= operator

impl BitOr<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the | operator

fn bitor(self, other: Wrapping<u8>) -> Wrapping<u8>

The method for the | operator

impl BitOrAssign<Wrapping<u8>> for Wrapping<u8>

fn bitor_assign(&mut self, other: Wrapping<u8>)

The method for the |= operator

impl BitAnd<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the & operator

fn bitand(self, other: Wrapping<u8>) -> Wrapping<u8>

The method for the & operator

impl BitAndAssign<Wrapping<u8>> for Wrapping<u8>

fn bitand_assign(&mut self, other: Wrapping<u8>)

The method for the & operator

impl Neg for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the - operator

fn neg(self) -> Wrapping<u8>

The method for the unary - operator

impl Add<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the + operator

fn add(self, other: Wrapping<u16>) -> Wrapping<u16>

The method for the + operator

impl AddAssign<Wrapping<u16>> for Wrapping<u16>

fn add_assign(&mut self, other: Wrapping<u16>)

The method for the += operator

impl Sub<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the - operator

fn sub(self, other: Wrapping<u16>) -> Wrapping<u16>

The method for the - operator

impl SubAssign<Wrapping<u16>> for Wrapping<u16>

fn sub_assign(&mut self, other: Wrapping<u16>)

The method for the -= operator

impl Mul<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the * operator

fn mul(self, other: Wrapping<u16>) -> Wrapping<u16>

The method for the * operator

impl MulAssign<Wrapping<u16>> for Wrapping<u16>

fn mul_assign(&mut self, other: Wrapping<u16>)

The method for the *= operator

impl Div<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the / operator

fn div(self, other: Wrapping<u16>) -> Wrapping<u16>

The method for the / operator

impl DivAssign<Wrapping<u16>> for Wrapping<u16>

fn div_assign(&mut self, other: Wrapping<u16>)

The method for the /= operator

impl Rem<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the % operator

fn rem(self, other: Wrapping<u16>) -> Wrapping<u16>

The method for the % operator

impl RemAssign<Wrapping<u16>> for Wrapping<u16>

fn rem_assign(&mut self, other: Wrapping<u16>)

The method for the %= operator

impl Not for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the ! operator

fn not(self) -> Wrapping<u16>

The method for the unary ! operator

impl BitXor<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the ^ operator

fn bitxor(self, other: Wrapping<u16>) -> Wrapping<u16>

The method for the ^ operator

impl BitXorAssign<Wrapping<u16>> for Wrapping<u16>

fn bitxor_assign(&mut self, other: Wrapping<u16>)

The method for the ^= operator

impl BitOr<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the | operator

fn bitor(self, other: Wrapping<u16>) -> Wrapping<u16>

The method for the | operator

impl BitOrAssign<Wrapping<u16>> for Wrapping<u16>

fn bitor_assign(&mut self, other: Wrapping<u16>)

The method for the |= operator

impl BitAnd<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the & operator

fn bitand(self, other: Wrapping<u16>) -> Wrapping<u16>

The method for the & operator

impl BitAndAssign<Wrapping<u16>> for Wrapping<u16>

fn bitand_assign(&mut self, other: Wrapping<u16>)

The method for the & operator

impl Neg for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the - operator

fn neg(self) -> Wrapping<u16>

The method for the unary - operator

impl Add<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the + operator

fn add(self, other: Wrapping<u32>) -> Wrapping<u32>

The method for the + operator

impl AddAssign<Wrapping<u32>> for Wrapping<u32>

fn add_assign(&mut self, other: Wrapping<u32>)

The method for the += operator

impl Sub<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the - operator

fn sub(self, other: Wrapping<u32>) -> Wrapping<u32>

The method for the - operator

impl SubAssign<Wrapping<u32>> for Wrapping<u32>

fn sub_assign(&mut self, other: Wrapping<u32>)

The method for the -= operator

impl Mul<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the * operator

fn mul(self, other: Wrapping<u32>) -> Wrapping<u32>

The method for the * operator

impl MulAssign<Wrapping<u32>> for Wrapping<u32>

fn mul_assign(&mut self, other: Wrapping<u32>)

The method for the *= operator

impl Div<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the / operator

fn div(self, other: Wrapping<u32>) -> Wrapping<u32>

The method for the / operator

impl DivAssign<Wrapping<u32>> for Wrapping<u32>

fn div_assign(&mut self, other: Wrapping<u32>)

The method for the /= operator

impl Rem<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the % operator

fn rem(self, other: Wrapping<u32>) -> Wrapping<u32>

The method for the % operator

impl RemAssign<Wrapping<u32>> for Wrapping<u32>

fn rem_assign(&mut self, other: Wrapping<u32>)

The method for the %= operator

impl Not for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the ! operator

fn not(self) -> Wrapping<u32>

The method for the unary ! operator

impl BitXor<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the ^ operator

fn bitxor(self, other: Wrapping<u32>) -> Wrapping<u32>

The method for the ^ operator

impl BitXorAssign<Wrapping<u32>> for Wrapping<u32>

fn bitxor_assign(&mut self, other: Wrapping<u32>)

The method for the ^= operator

impl BitOr<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the | operator

fn bitor(self, other: Wrapping<u32>) -> Wrapping<u32>

The method for the | operator

impl BitOrAssign<Wrapping<u32>> for Wrapping<u32>

fn bitor_assign(&mut self, other: Wrapping<u32>)

The method for the |= operator

impl BitAnd<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the & operator

fn bitand(self, other: Wrapping<u32>) -> Wrapping<u32>

The method for the & operator

impl BitAndAssign<Wrapping<u32>> for Wrapping<u32>

fn bitand_assign(&mut self, other: Wrapping<u32>)

The method for the & operator

impl Neg for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the - operator

fn neg(self) -> Wrapping<u32>

The method for the unary - operator

impl Add<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the + operator

fn add(self, other: Wrapping<u64>) -> Wrapping<u64>

The method for the + operator

impl AddAssign<Wrapping<u64>> for Wrapping<u64>

fn add_assign(&mut self, other: Wrapping<u64>)

The method for the += operator

impl Sub<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the - operator

fn sub(self, other: Wrapping<u64>) -> Wrapping<u64>

The method for the - operator

impl SubAssign<Wrapping<u64>> for Wrapping<u64>

fn sub_assign(&mut self, other: Wrapping<u64>)

The method for the -= operator

impl Mul<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the * operator

fn mul(self, other: Wrapping<u64>) -> Wrapping<u64>

The method for the * operator

impl MulAssign<Wrapping<u64>> for Wrapping<u64>

fn mul_assign(&mut self, other: Wrapping<u64>)

The method for the *= operator

impl Div<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the / operator

fn div(self, other: Wrapping<u64>) -> Wrapping<u64>

The method for the / operator

impl DivAssign<Wrapping<u64>> for Wrapping<u64>

fn div_assign(&mut self, other: Wrapping<u64>)

The method for the /= operator

impl Rem<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the % operator

fn rem(self, other: Wrapping<u64>) -> Wrapping<u64>

The method for the % operator

impl RemAssign<Wrapping<u64>> for Wrapping<u64>

fn rem_assign(&mut self, other: Wrapping<u64>)

The method for the %= operator

impl Not for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the ! operator

fn not(self) -> Wrapping<u64>

The method for the unary ! operator

impl BitXor<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the ^ operator

fn bitxor(self, other: Wrapping<u64>) -> Wrapping<u64>

The method for the ^ operator

impl BitXorAssign<Wrapping<u64>> for Wrapping<u64>

fn bitxor_assign(&mut self, other: Wrapping<u64>)

The method for the ^= operator

impl BitOr<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the | operator

fn bitor(self, other: Wrapping<u64>) -> Wrapping<u64>

The method for the | operator

impl BitOrAssign<Wrapping<u64>> for Wrapping<u64>

fn bitor_assign(&mut self, other: Wrapping<u64>)

The method for the |= operator

impl BitAnd<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the & operator

fn bitand(self, other: Wrapping<u64>) -> Wrapping<u64>

The method for the & operator

impl BitAndAssign<Wrapping<u64>> for Wrapping<u64>

fn bitand_assign(&mut self, other: Wrapping<u64>)

The method for the & operator

impl Neg for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the - operator

fn neg(self) -> Wrapping<u64>

The method for the unary - operator

impl Add<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the + operator

fn add(self, other: Wrapping<isize>) -> Wrapping<isize>

The method for the + operator

impl AddAssign<Wrapping<isize>> for Wrapping<isize>

fn add_assign(&mut self, other: Wrapping<isize>)

The method for the += operator

impl Sub<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the - operator

fn sub(self, other: Wrapping<isize>) -> Wrapping<isize>

The method for the - operator

impl SubAssign<Wrapping<isize>> for Wrapping<isize>

fn sub_assign(&mut self, other: Wrapping<isize>)

The method for the -= operator

impl Mul<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the * operator

fn mul(self, other: Wrapping<isize>) -> Wrapping<isize>

The method for the * operator

impl MulAssign<Wrapping<isize>> for Wrapping<isize>

fn mul_assign(&mut self, other: Wrapping<isize>)

The method for the *= operator

impl Div<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the / operator

fn div(self, other: Wrapping<isize>) -> Wrapping<isize>

The method for the / operator

impl DivAssign<Wrapping<isize>> for Wrapping<isize>

fn div_assign(&mut self, other: Wrapping<isize>)

The method for the /= operator

impl Rem<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the % operator

fn rem(self, other: Wrapping<isize>) -> Wrapping<isize>

The method for the % operator

impl RemAssign<Wrapping<isize>> for Wrapping<isize>

fn rem_assign(&mut self, other: Wrapping<isize>)

The method for the %= operator

impl Not for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the ! operator

fn not(self) -> Wrapping<isize>

The method for the unary ! operator

impl BitXor<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the ^ operator

fn bitxor(self, other: Wrapping<isize>) -> Wrapping<isize>

The method for the ^ operator

impl BitXorAssign<Wrapping<isize>> for Wrapping<isize>

fn bitxor_assign(&mut self, other: Wrapping<isize>)

The method for the ^= operator

impl BitOr<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the | operator

fn bitor(self, other: Wrapping<isize>) -> Wrapping<isize>

The method for the | operator

impl BitOrAssign<Wrapping<isize>> for Wrapping<isize>

fn bitor_assign(&mut self, other: Wrapping<isize>)

The method for the |= operator

impl BitAnd<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the & operator

fn bitand(self, other: Wrapping<isize>) -> Wrapping<isize>

The method for the & operator

impl BitAndAssign<Wrapping<isize>> for Wrapping<isize>

fn bitand_assign(&mut self, other: Wrapping<isize>)

The method for the & operator

impl Neg for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the - operator

fn neg(self) -> Wrapping<isize>

The method for the unary - operator

impl Add<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the + operator

fn add(self, other: Wrapping<i8>) -> Wrapping<i8>

The method for the + operator

impl AddAssign<Wrapping<i8>> for Wrapping<i8>

fn add_assign(&mut self, other: Wrapping<i8>)

The method for the += operator

impl Sub<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the - operator

fn sub(self, other: Wrapping<i8>) -> Wrapping<i8>

The method for the - operator

impl SubAssign<Wrapping<i8>> for Wrapping<i8>

fn sub_assign(&mut self, other: Wrapping<i8>)

The method for the -= operator

impl Mul<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the * operator

fn mul(self, other: Wrapping<i8>) -> Wrapping<i8>

The method for the * operator

impl MulAssign<Wrapping<i8>> for Wrapping<i8>

fn mul_assign(&mut self, other: Wrapping<i8>)

The method for the *= operator

impl Div<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the / operator

fn div(self, other: Wrapping<i8>) -> Wrapping<i8>

The method for the / operator

impl DivAssign<Wrapping<i8>> for Wrapping<i8>

fn div_assign(&mut self, other: Wrapping<i8>)

The method for the /= operator

impl Rem<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the % operator

fn rem(self, other: Wrapping<i8>) -> Wrapping<i8>

The method for the % operator

impl RemAssign<Wrapping<i8>> for Wrapping<i8>

fn rem_assign(&mut self, other: Wrapping<i8>)

The method for the %= operator

impl Not for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the ! operator

fn not(self) -> Wrapping<i8>

The method for the unary ! operator

impl BitXor<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the ^ operator

fn bitxor(self, other: Wrapping<i8>) -> Wrapping<i8>

The method for the ^ operator

impl BitXorAssign<Wrapping<i8>> for Wrapping<i8>

fn bitxor_assign(&mut self, other: Wrapping<i8>)

The method for the ^= operator

impl BitOr<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the | operator

fn bitor(self, other: Wrapping<i8>) -> Wrapping<i8>

The method for the | operator

impl BitOrAssign<Wrapping<i8>> for Wrapping<i8>

fn bitor_assign(&mut self, other: Wrapping<i8>)

The method for the |= operator

impl BitAnd<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the & operator

fn bitand(self, other: Wrapping<i8>) -> Wrapping<i8>

The method for the & operator

impl BitAndAssign<Wrapping<i8>> for Wrapping<i8>

fn bitand_assign(&mut self, other: Wrapping<i8>)

The method for the & operator

impl Neg for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the - operator

fn neg(self) -> Wrapping<i8>

The method for the unary - operator

impl Add<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the + operator

fn add(self, other: Wrapping<i16>) -> Wrapping<i16>

The method for the + operator

impl AddAssign<Wrapping<i16>> for Wrapping<i16>

fn add_assign(&mut self, other: Wrapping<i16>)

The method for the += operator

impl Sub<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the - operator

fn sub(self, other: Wrapping<i16>) -> Wrapping<i16>

The method for the - operator

impl SubAssign<Wrapping<i16>> for Wrapping<i16>

fn sub_assign(&mut self, other: Wrapping<i16>)

The method for the -= operator

impl Mul<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the * operator

fn mul(self, other: Wrapping<i16>) -> Wrapping<i16>

The method for the * operator

impl MulAssign<Wrapping<i16>> for Wrapping<i16>

fn mul_assign(&mut self, other: Wrapping<i16>)

The method for the *= operator

impl Div<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the / operator

fn div(self, other: Wrapping<i16>) -> Wrapping<i16>

The method for the / operator

impl DivAssign<Wrapping<i16>> for Wrapping<i16>

fn div_assign(&mut self, other: Wrapping<i16>)

The method for the /= operator

impl Rem<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the % operator

fn rem(self, other: Wrapping<i16>) -> Wrapping<i16>

The method for the % operator

impl RemAssign<Wrapping<i16>> for Wrapping<i16>

fn rem_assign(&mut self, other: Wrapping<i16>)

The method for the %= operator

impl Not for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the ! operator

fn not(self) -> Wrapping<i16>

The method for the unary ! operator

impl BitXor<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the ^ operator

fn bitxor(self, other: Wrapping<i16>) -> Wrapping<i16>

The method for the ^ operator

impl BitXorAssign<Wrapping<i16>> for Wrapping<i16>

fn bitxor_assign(&mut self, other: Wrapping<i16>)

The method for the ^= operator

impl BitOr<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the | operator

fn bitor(self, other: Wrapping<i16>) -> Wrapping<i16>

The method for the | operator

impl BitOrAssign<Wrapping<i16>> for Wrapping<i16>

fn bitor_assign(&mut self, other: Wrapping<i16>)

The method for the |= operator

impl BitAnd<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the & operator

fn bitand(self, other: Wrapping<i16>) -> Wrapping<i16>

The method for the & operator

impl BitAndAssign<Wrapping<i16>> for Wrapping<i16>

fn bitand_assign(&mut self, other: Wrapping<i16>)

The method for the & operator

impl Neg for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the - operator

fn neg(self) -> Wrapping<i16>

The method for the unary - operator

impl Add<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the + operator

fn add(self, other: Wrapping<i32>) -> Wrapping<i32>

The method for the + operator

impl AddAssign<Wrapping<i32>> for Wrapping<i32>

fn add_assign(&mut self, other: Wrapping<i32>)

The method for the += operator

impl Sub<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the - operator

fn sub(self, other: Wrapping<i32>) -> Wrapping<i32>

The method for the - operator

impl SubAssign<Wrapping<i32>> for Wrapping<i32>

fn sub_assign(&mut self, other: Wrapping<i32>)

The method for the -= operator

impl Mul<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the * operator

fn mul(self, other: Wrapping<i32>) -> Wrapping<i32>

The method for the * operator

impl MulAssign<Wrapping<i32>> for Wrapping<i32>

fn mul_assign(&mut self, other: Wrapping<i32>)

The method for the *= operator

impl Div<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the / operator

fn div(self, other: Wrapping<i32>) -> Wrapping<i32>

The method for the / operator

impl DivAssign<Wrapping<i32>> for Wrapping<i32>

fn div_assign(&mut self, other: Wrapping<i32>)

The method for the /= operator

impl Rem<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the % operator

fn rem(self, other: Wrapping<i32>) -> Wrapping<i32>

The method for the % operator

impl RemAssign<Wrapping<i32>> for Wrapping<i32>

fn rem_assign(&mut self, other: Wrapping<i32>)

The method for the %= operator

impl Not for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the ! operator

fn not(self) -> Wrapping<i32>

The method for the unary ! operator

impl BitXor<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the ^ operator

fn bitxor(self, other: Wrapping<i32>) -> Wrapping<i32>

The method for the ^ operator

impl BitXorAssign<Wrapping<i32>> for Wrapping<i32>

fn bitxor_assign(&mut self, other: Wrapping<i32>)

The method for the ^= operator

impl BitOr<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the | operator

fn bitor(self, other: Wrapping<i32>) -> Wrapping<i32>

The method for the | operator

impl BitOrAssign<Wrapping<i32>> for Wrapping<i32>

fn bitor_assign(&mut self, other: Wrapping<i32>)

The method for the |= operator

impl BitAnd<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the & operator

fn bitand(self, other: Wrapping<i32>) -> Wrapping<i32>

The method for the & operator

impl BitAndAssign<Wrapping<i32>> for Wrapping<i32>

fn bitand_assign(&mut self, other: Wrapping<i32>)

The method for the & operator

impl Neg for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the - operator

fn neg(self) -> Wrapping<i32>

The method for the unary - operator

impl Add<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the + operator

fn add(self, other: Wrapping<i64>) -> Wrapping<i64>

The method for the + operator

impl AddAssign<Wrapping<i64>> for Wrapping<i64>

fn add_assign(&mut self, other: Wrapping<i64>)

The method for the += operator

impl Sub<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the - operator

fn sub(self, other: Wrapping<i64>) -> Wrapping<i64>

The method for the - operator

impl SubAssign<Wrapping<i64>> for Wrapping<i64>

fn sub_assign(&mut self, other: Wrapping<i64>)

The method for the -= operator

impl Mul<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the * operator

fn mul(self, other: Wrapping<i64>) -> Wrapping<i64>

The method for the * operator

impl MulAssign<Wrapping<i64>> for Wrapping<i64>

fn mul_assign(&mut self, other: Wrapping<i64>)

The method for the *= operator

impl Div<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the / operator

fn div(self, other: Wrapping<i64>) -> Wrapping<i64>

The method for the / operator

impl DivAssign<Wrapping<i64>> for Wrapping<i64>

fn div_assign(&mut self, other: Wrapping<i64>)

The method for the /= operator

impl Rem<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the % operator

fn rem(self, other: Wrapping<i64>) -> Wrapping<i64>

The method for the % operator

impl RemAssign<Wrapping<i64>> for Wrapping<i64>

fn rem_assign(&mut self, other: Wrapping<i64>)

The method for the %= operator

impl Not for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the ! operator

fn not(self) -> Wrapping<i64>

The method for the unary ! operator

impl BitXor<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the ^ operator

fn bitxor(self, other: Wrapping<i64>) -> Wrapping<i64>

The method for the ^ operator

impl BitXorAssign<Wrapping<i64>> for Wrapping<i64>

fn bitxor_assign(&mut self, other: Wrapping<i64>)

The method for the ^= operator

impl BitOr<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the | operator

fn bitor(self, other: Wrapping<i64>) -> Wrapping<i64>

The method for the | operator

impl BitOrAssign<Wrapping<i64>> for Wrapping<i64>

fn bitor_assign(&mut self, other: Wrapping<i64>)

The method for the |= operator

impl BitAnd<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the & operator

fn bitand(self, other: Wrapping<i64>) -> Wrapping<i64>

The method for the & operator

impl BitAndAssign<Wrapping<i64>> for Wrapping<i64>

fn bitand_assign(&mut self, other: Wrapping<i64>)

The method for the & operator

impl Neg for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the - operator

fn neg(self) -> Wrapping<i64>

The method for the unary - operator

Derived Implementations

impl<T> Hash for Wrapping<T> where T: Hash

fn hash<__HT>(&self, __arg_0: &mut __HT) where __HT: Hasher

Feeds this value into the state given, updating the hasher as necessary.

fn hash_slice<H>(data: &[Self], state: &mut H) where H: Hasher

Feeds a slice of this type into the state provided.

impl<T> Default for Wrapping<T> where T: Default

fn default() -> Wrapping<T>

Returns the "default value" for a type.

impl<T> Copy for Wrapping<T> where T: Copy

impl<T> Clone for Wrapping<T> where T: Clone

fn clone(&self) -> Wrapping<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Ord for Wrapping<T> where T: Ord

fn cmp(&self, __arg_0: &Wrapping<T>) -> Ordering

This method returns an Ordering between self and other.

impl<T> PartialOrd<Wrapping<T>> for Wrapping<T> where T: PartialOrd<T>

fn partial_cmp(&self, __arg_0: &Wrapping<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, __arg_0: &Wrapping<T>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, __arg_0: &Wrapping<T>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, __arg_0: &Wrapping<T>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, __arg_0: &Wrapping<T>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T> Eq for Wrapping<T> where T: Eq

impl<T> PartialEq<Wrapping<T>> for Wrapping<T> where T: PartialEq<T>

fn eq(&self, __arg_0: &Wrapping<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, __arg_0: &Wrapping<T>) -> bool

This method tests for !=.